JIS Z 8901 試驗粉塵灰灰塵灰塵
 

JIS Z 8901 試驗粉塵列表   　　JIS粉塵是依據JIS（Japanese Industrial Standard，即日本工業標準）生產的試驗粉塵，常被用于一些日系產品的檢測。 　　本公司可為廣大國內用戶提供日本進口的下述檢測雜質，包括JIS Z 8901的試驗粉塵和玻璃珠產品；請在與我們聯系的時候描述清楚您需要的是下面哪種產品： JIS Z 8901 *Classification     Class Material used Median * diameter ( µm ) Particle density ( g/cm3 ) Chemical composition % ( mass ) Class 1 Class 2 Class 3 Quartz sand 185 to 200 27 to 31 6.6 to 8.6 2.6 to 2.7 SiO2   95min Fe2O3, Al2O3,TiO2 MgO,Ign.loss 5max Class 4 Class 9 Talc 7.2 to 9.2 4.0 to 5.0 2.7 to 2.9 SiO2 ••• 60 to 63, Al2O3 ••• 0 to 3, MgO ••• 30 to 34 Fe2O3 ••• 0 to 3, CaO ••• 0 to 2, Ign.loss ••• 3 to 7 Class 5 Class 10 Fly ash 13 to 17 4.8 to 5.7 1.95 min SiO2Åc45min Ign.lossÅc5max Class 7 Class 8 Class 11 ** KANTO (Japanese) loam 27 to 31 6.6 to 8.6 1.6 to 2.3 2.9 to 3.1 SiO2 ••• 34 to 40, Al2O3 ••• 26 to 32, MgO ••• 0 to 7 Fe2O3 ••• 17 to 23, CaO ••• 0 to 3, Ign.loss ••• 0 to 4 Class 12 Carbon black Particle size range ••• 0.03 to 0.20 µm Absorbed amount of DBP ••• 25 to 34 ml/100g Adsorbed amount of iodine ••• 22 to 30 mg/g Class 16 Class 17 Calcium- carbonate (heavy) 3.6 to 4.6 1.9 to 2.4 2.7 to 2.8 CaO ••• 54 to 56, SiO2 ••• 0 to 3, Ign.loss ••• 42 to 45 MgO ••• 0 to 3, Fe2O3 ••• 0 to 1       * Particle size distributions are defined by JIS Z 8901. ** Sintered at 800°C, 2hours. Note :1) Class15 Mixed powder is distributed by Japan Air Cleaning Association and contains 72% of Class8, 23% of Class12 and 5% of cotton linter. 2) Class13 and Class 14 are now absent ones.     *Particle size distribution of Test Powders 1     Particle size distribution of Class 1, Class 2 and Class 3 ( Quartz sand )   Particle size µm Oversize(on mass basis)% Class 1 Class 2 Class 3 5 - 88±5 61±3 10 - 76±3 43±3 20 - 62±3 27±3 30 - 50±3 15±3 40 - 39±3 9±3 45 99 min. - - 75 90±3 20max. 3max. 106 80±3 - - 150 65±3 - - 212 45±3 - - 300 1max. - - Particle size distribution of Class 4 and Class 9 ( Talc )   Particle size µm Oversize(on mass basis)% Class 4 Class 9 2 - 79±5 4 - 55±5 5 69±5 - 8 - 23±5 10 40±5 - 16 - 6±3 20 12±5 - 30 - - 40 3±3 - 75 1max -     Particle size distribution of Class 5 and Class 10 ( Fly ash )   Particle size µm Oversize(on mass basis)% Class 5 Class 10 2 - 82±5 4 - 60±3 5 84±5 - 8 - 22±5 10 60±5 - 16 - 3±3 20 32±5 - 30 15±3 - 40 8±3 - 106 1max. - Particle size distribution of Class 7, Class 8 and Class 11 ( KNATO(Japanese) loam )   Particle size µm Oversize(on mass basis)% Class 7 Class 8 Class 11 1 - - 65±3 2 - - 50±5 4 - - 22±3 5 88±5 61±5 - 6 - - 8±3 5 - - 3±3 10 76±3 43±3 - 20 62±3 27±3 - 30 50±3 15±3 - 40 39±3 9±3 - 75 20max. 3max. -   Class 12 Particle size range ( Carbon black )   0.03~0.20µm   Particle size distribution of Class 16 and Class 17 ( Calcium carbonate( heavy ))   Particle size µm Oversize(on mass basis)% Class 16 Class 17 1 - 80±5 2 76±5 54±5 4 - 18±5 5 40±5 - 8 - 4±3 10 10±5 - 16 - 1max. 20 1max. -     -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Glass beads GBL type Material used : Soda lime-silicate glass Particle density : 2.1 to 2.5 g/cm3 Refractive index : 1.51 to 1.53     Particle size distribution ( Unit :µm ) ( % mass basis )     Class Particle size in case of 90% oversize Particle size in case of 50% oversize Particle size in case of 10% oversize GBL-30 26 min. 30 ± 1.0 34 max. GBL-40 37 min. 40 ± 1.0 45 max. GBL-60 55 min. 59 ± 1.0 63 max. GBL-100 95 min. 100 ± 1.0 105 max.       Glass beads GBM type Material used : Barium-titanate glass Particle density : 4.0 to 4.2 g/cm3 Refractive index : 1.92 to 1.94     Particle size distribution ( Unit :µm ) ( % mass basis )     Class Particle size in case of 90% oversize Particle size in case of 50% oversize Particle size in case of 10% oversize GBM-20 18 min. 22 ± 1.0 26 max. GBM-30 26 min. 30 ± 1.0 34 max. GBM-40 37 min. 40 ± 1.0 45 max.       White fused alu mina Material used : Al2O3 99% min. Particle density : 3.9 to 4.0 g/cm3     Particle size distribution ( Unit :µm ) ( % mass basis )     Class Particle size in case of 94% oversize Particle size in case of 50% oversize Particle size in case of 3% oversize No.1 0.8 min. 2 ± 0.5 5 max. No.2 2.0 min. 4 ± 0.5 11 max. No.3 4.5 min. 8 ± 0.6 20 max. No.4 9.0 min. 14 ± 1 31 max. No.5 20 min. 30 ± 2 58 max. No.6 40 min. 57 ± 3 103 max.

   
ISO 12103-1 A2 Fine Test Dust A2粉  ISO 12103-1 A4 Coarse Test Dust A4粉  ISO 12103-1 A3 Medium Test Dust A3粉MTD粉塵  Arizona Test Dust Fractions 亞利桑那試驗粉塵
MIL 810E4 Silica Sand & Dust  Iron Oxide 波特蘭水泥 Type IGlass Beads 玻璃珠  PV 樹脂（噴融樹脂）  汽車安全帶測試粉塵ECE R16, Section 7.6.3.2 (GB 14166, Section 5.6.3.2液態雜質SoftC-2A   Quartzose Mineral Dust DMT emission test dust (IEC 60312 5.1.2.5)  Test Dust Type 8® DMT test dust type 8 (IEC 60312 5.1.2.3)  Quartzose Mineral DMT carpet test dust (IEC 60312 5.1.2.2) DMT Dolomite Sand (IEC 60312 5.1.2.1)A2 ISO 細灰  A4粗灰  亞利桑那沙子亞利桑那試驗粉塵  美國ISO MTD粉塵
A2測試粉A3中級試驗粉塵AC DUST A2 粉塵  ISO 試驗粉塵  亞力桑那A2粉塵  美國PTI碳黑粉塵  ISO 12103-2  M2鋁粉  A2 ISO 細灰  ISO 12103-2  M3鋁粉  ISO 12103-2  M4鋁粉ISO 12103-2  M5鋁粉JIS CLASS 2級粉塵  PTI 粉塵Nominal 0-5 Arizona  Test Dust  PTI 粉塵Nominal 10-20 Arizona  Test Dust  PTI 粗粉  PTI 粉塵Nominal 20-40 Arizona  Test Dust  試驗用粉塵12103-1 A2類粗粉粗灰美國亞利桑那A1粉  FLY ASH 飛灰Portland Cement波特蘭水泥美國亞利桑那M5粉APPIE JIS Z 8901 CLASS 1 試驗粉塵APPIE JIS試驗用粉體1 8種APPIE關東粉APPIE JIS test powders 1 class8 日本粉體工業技術協會APPIE  APPIE JIS Z 8901 試驗用粉體1，CLASS 8  APPIE JIS Z 8901 CLASS 15粉塵COTTON LINTERS 棉花纖維鐵粉（赤）氧化鐵  Carbon Black炭黑Ashrae test dust with carbon black  試験用粉體１の7種, 8種, 11種JIS粉塵是依據JIS（Japanese Industrial Standard，即日本工業標準）生產的試驗粉塵，常被用于一些日系產品的檢測。
　　本公司可為廣大國內用戶提供日本進口的下述檢測雜質，包括JIS Z 8901的試驗粉塵和玻璃珠產品；請在與我們聯系的時候描述清楚您需要的是下面哪種產品Quartz sand Talc Fly ash KANTO (Japanese) loam  Carbon black  Calcium- carbonate (heavy)  Glass beads GBL type  Glass beads GBM type White fused alu mina JIS Z8901 1 種(硅砂) JIS Z8901 3 種（硅砂）JIS Z8901 4 種（滑石粉）JIS Z8901 7 種（關東粉）JIS Z8901 8 種（關東粉）鐵粉0-5微米Fe₃O₄
鐵粉（赤）0-5微米Fe₂O₃  鐵粉（赤）5-10微米Fe₂O₃  棉花纖維COTTON LINTERS